GAMER
v1.0-stable
像素印刷 T 恤 — 生产就绪
// RELEASE_NOTES.md
0x319
System Architect of Apparel
0x319 is a system architect with decades of experience operating at the infrastructure layer of enterprise IT. When legacy systems failed, 0x319 patched them. When interfaces collapsed under load, 0x319 rebuilt them from the kernel up. AltMode is that same discipline — compiled into fabric, deployed as garments. Every stitch is a commit. Every release is final.
0x319 是一位在企业 IT 基础架构层深耕数十年的系统架构师。当遗留系统崩溃，他来修补；当接口在高负载下失效，他从内核重建。AltMode 是同一套设计逻辑的延伸——将严密的工程思维编译进织物，以服装的形式部署。每一针是一次提交，每一次发布都是最终版本。
// products.index — 2 entries loaded / 2 个产品已加载
T-SHIRT / 短袖
GAMER v1.0-stable
像素印刷短袖 T 恤
A production-ready crew-neck tee engineered for high-contrast environments. 280g combed cotton delivers a dense, low-noise hand-feel. The 3D thick-plate pixel logo runs no render lag — zero bleed, absolute edge definition.
专为高对比环境设计的圆领短袖。280 克精梳棉提供厚实、低噪声的触感。三维厚板像素 Logo 零溢色，边缘绝对锐利。
HOODIE / 连帽衫
GAMER v1.0-stable
像素印刷重磅连帽卫衣
A physical patch deployed directly to the human kernel. 480g high-density fleece with pixel-art chest logo and neon-green side-seam branding. Engineered for sustained uptime in low-temperature operating conditions.
直接部署至人体内核的物理补丁。480 克高密度摇粒绒，胸前像素艺术 Logo，侧缝霓虹绿品牌丝线刺绣。专为低温运行条件下的持续稳定运转而设计。
Kernel Specs — Fabric
// fabric_config.h — Physical substrate definition
| MATERIAL |
PRIMARY 100% High-Density Combed Cotton 100% 高密度精梳棉 |
| GSM |
280 g/m² — Production Grade 克重 280 克 / 平方米，生产级重量 |
| SURFACE |
Non-pilling. Zero fiber lift. Stable surface state across 50+ wash cycles. 防起球处理，纤维零浮毛，50 次以上洗涤后表面状态稳定。 |
| SHRINKAGE |
SPEC Low-shrinkage pre-treated — < 3% dimensional shift 低缩水预处理，尺寸偏移小于 3%。 |
| THERMAL |
Latent comfort. Breathable open-weave microstructure. Ambient-adaptive. 潜伏舒适性。透气开放式微观编织结构，自适应环境温度。 |
Interface — Print Layer
// print_interface.spec — Render pipeline definition
| PROCESS |
METHOD 3D Thick-Plate Screen Printing 三维厚板丝网印刷工艺 |
| RESOLUTION |
Pixel-perfect mapping. Hard-edge bitmap render. Sub-pixel alignment enforced. 像素级精确映射，硬边位图渲染，强制执行子像素对齐。 |
| DEPTH |
Raised relief surface. Tactile Z-axis. Print thickness: ~0.8mm above substrate. 浮凸立体表面，可感知 Z 轴。印刷厚度：高于织物基底约 0.8 毫米。 |
| EDGE FIDELITY |
Zero bleed tolerance. Ink containment: absolute. No anti-aliasing — intentional. 零溢墨容差，绝对油墨封边控制。无抗锯齿处理——设计如此。 |
| DURABILITY |
TESTED 80+ wash cycles without color shift or edge degradation. 经 80 次以上洗涤测试，无色偏，无边缘退化。 |
UI Detail — Branding Layer
// ui_components.conf — Peripheral identity system
| SIDE-SEAM |
Vertical 侧缝沿线纵向刺绣 altmode.cc_ 品牌标识，采用与 #39FF14 匹配的霓虹绿真丝绣线，贯通整条侧缝。 |
| CHEST LOGO |
RENDER 8-bit pixel-art "GAMER" logotype, centered, white ink over black substrate. 3D relief plate. 8 位像素艺术"GAMER"字标，居中排布，黑底白墨，三维浮凸版。 |
| LABEL |
Woven neck label: 领标：梭织颈标，内容为 AltMode.cc / v1.0.4 / 0x319，等宽字体，哑黑底。 |
| TYPOGRAPHY |
All type: monospaced. Pixel-grid locked. No decorative glyphs. Signal over noise. 所有文字：等宽字体，像素网格锁定，无装饰字形。信噪比优先。 |
// maintenance.sh — Execute with care. Irreversible operations flagged with [WARN].
$ soft_reboot --mode=gentle
Machine wash cold (≤30°C). Gentle cycle.
冷水机洗，水温不超过 30°C，轻柔模式。
$ dry --low-heat --no-tumble
Line dry preferred. Low-heat tumble if required.
推荐自然晾干。如需烘干，请使用低温模式。
$ iron --skip-print-layer
Iron inside out. Avoid direct contact with print surface.
反面熨烫，避免熨斗直接接触印刷面。
$ dry_clean --compatible
Dry cleaning permitted. Standard solvent-safe.
可干洗，标准溶剂兼容。
[WARN] do_not bleach
Do not bleach. Kernel corruption. Irreversible.
禁止漂白。将导致内核损坏，不可恢复。
[WARN] do_not force_quit --temp=high
Do not tumble dry high heat. Print layer deformation.
禁止高温烘干，印刷层将发生不可逆形变。